Pudate_time：2020-08-05read_num:2388 preople

Water slides in the water park equipment is an essential part of, is the leading role in the whole project, water slides by everybody's like in the water park, water slides are using water suspension technology, give us water jet thrust and inertia, let visitors experience the weightlessness ceaselessly to overweight, again by overweight to weightlessness entertainment pleasure brought by the moment of conversion. The manufacturer of facilities of general water park is to use fibreglass to undertake water slide is made normally, and its make must accord with national concerned standard, such ability assures the quality of water park equipment.
On the one hand, the surface of the water slide should be smooth and crack-free with uniform color. The use of FIBERglass should meet at least three requirements:

1, the resin should be good water resistance and aging resistance;

2, the glass fiber should be alkali free glass fiber, fiber surface should have good infiltration;

3. The thickness of the slide shall not be less than 6mm and the thickness of the flange shall not be less than 9mm.

On the other hand, holes, wrinkles, bubbles, poor curing, poor impregnation, cracks, defects and other problems are not allowed on the inner surface of the water slide. Bad curing, bad impregnation, defect, burr and other problems are not allowed on the back. The cutting surface is not allowed to exist stratification, burr and other problems.

At present, there is a kind of RTM (L-RTM), which is a kind of technology to obtain composite components by the flow infiltration of the reinforced material and solidification in the closed mold cavity with a vacuum assisted resin with low viscosity. The finished products of the slide produced by L-RTM process die have passed the standard test and all meet the requirements of the relevant standards. At present, the production process has a leading position in the aquatic recreation industry in terms of product technology. Compared with the traditional product production process, the products using L-RTM production process have obvious advantages.